Training
Library

Compliance Training
Safety Best Practices
Other

Required OSHA Training

Personal Protective Equipment

[Watch time: 14:13]

Watch the video on Personal Protective Equipment compliance and be sure to take the quiz by clicking the button below. Make sure you submit your quiz so your progress can be tracked!

VEIC - PPE Quiz

"*" indicates required fields

Email (optional)

First Name*

Last Name*

Department*

1. PPE is designed to protect:*

The Company Vault

Body parts or body systems

2. PPE is considered the last line of defense against injury:*

True

False

3. Questions regarding PPE should be directed to your supervisor:*

True

False

4. You must be trained to wear each piece of PPE that is required for your job:*

True

False

5. Failure to use PPE as required can result in serious injury and discipline:*

True

False

6. PPE must be inspected:*

Before each use

Annually

7. Damaged or defective PPE must be:*

Removed from service

Repaired on the spot to make sure your work is completed on time

8. To use PPE properly you should (select all that apply):*

Be sure you select the proper model and size

Pick whatever is the most comfortable

Inspect before use and wear the PPE where and when required

All of the above

9. PPE must be inspected, cleaned and stored as instructed by the manufacturer, supplier or qualified person:*

True

False

10. Management is ultimately responsible for enforcing the adequate functionality, use, maintenance and sanitation of PPE, even when employees bring their own equipment:*

False

True

Take Quiz

Hazard Communication

[Watch time: 8:20]

Complete the Hazard Communication video and take the following quiz! Be sure to submit when you’re finished so your progress is tracked.

VEIC - HazCom Quiz

"*" indicates required fields

Email (optional)

First Name*

Last Name*

Your Department*

1. There are two types of hazards that chemicals can possess, they are:*

Physical and Health Hazards

Electrical and Mechanical

2. You only need to wear PPE when you are going to contact the hazardous material directly:*

True

False

3. Labels are required on all containers with hazardous chemical contents:*

True

False

4. SDS stands for:*

Standard Development System

Safety Data Sheet

5. What are the two types of Signal Words located on a GHS label?*

Danger and Warning

Hazard and Threat

6. An SDS contains which of the following components? (May choose more than one)*

Hazard Identification

Stability and reactivity

Transport information

First aid measures

Handling and storage

All of the above

7. A good safety practice is to read labels and the SDS before using a new chemical:*

True

False

8. If you have questions regarding chemical safety you should ask:*

Someone who has more experience in the facility than you do

Your supervisor or the program administrator

9. When working with chemicals you should:*

Always change your procedure so you do not get bored

Always perform the job the way you were trained

10. I need to remember:*

The location of the Hazardous Chemical List and the SDS File

The location of the coffee pot

Take Quiz

Bloodborne Pathogens

[Watch time: 11:09]

Bloodborne Pathogens safety training covers the important protocols when dealing with bodily fluids in the workplace. Watch the video and complete the quiz!

VEIC - Bloodborne Pathogens Quiz

"*" indicates required fields

Email*

Department*

First Name*

Last Name*

Blood borne pathogens are capable of causing disease in humans:

True

False

Blood borne pathogens can enter the human body through:

Fingernails and toenails

Broken skin and mucus membranes

In our facility we can be exposed to blood borne pathogens through:

First aid and clean-up activities

Production and maintenance work

We cannot tell by looking at an individual if he/she has been infected:

True

False

With Universal Precautions, we do the following:

Treat all blood and other bodily fluid as if it were contaminated

Let someone else do our job

If a medical emergency occurs and we do not have PPE one very important action to take is:

Perform CPR

Avoid all contact with blood and other bodily fluid

PPE that is always required for responding to any incident is:

Safety shoes and a hard hat

Safety glasses and disposable gloves

We always do this at the conclusion of an incident:

Wash our hands

Have cup of coffee

If we think we’ve experienced an exposure incident we must:

Wash/flush the area contacted and report the incident

Hope everything is OK

All responders have a right to Hepatitis B vaccinations:

True

False

Take Quiz

Fall Protection

[Watch time: 13:04]

View the Fall Protection training in accordance with OSHA Compliance standards. Take the quiz below and submit!

VEIC - Fall Protection Quiz

"*" indicates required fields

Email (optional)

First Name*

Last Name*

Your Department*

1. OSHA regulations require some type of fall protection above how many feet?*

10'

2. True or false: Falls are the leading cause of death in the construction industry.*

False

True

3. Fall protection systems can include three of the following:*

Guard rail systems

Safety nets

Personal Fall Arrest Systems

Working on flat roofs only

Offsite video monitoring

4. Choose the three components of a Personal Fall Arrest system below:*

Proper Training

Hard hat

Lifeline

ANSI Approved Work boots

Anchor

Body harness

5. A properly designed Personal Fall Arrest system includes what three of the following:*

Limit maximum arresting force on employee to 1,800 pounds when using a body harness.

Allow for two people to anchor to the same point.

Be the same for every solar installation

Bring employee to complete stop and limit maximum deceleration distance employee travels to 3.5 feet

Be rigged such that an employee cannot fall more than 6 feet

6. A safety anchor must have the capability of supporting at least _____ pounds per employee attached:*

500 lbs

1,000 lbs

1,500 lbs

3,000 lbs

5,000 lbs

7. True or False: a body harness in a personal fall arrest system must have the attachment point located in the center of the wearer's back.*

False

True

8. Roof anchors, dee-rings, and snaphooks with rust on hem are not required to be removed from service*

False

True

9. When inspecting fall protection equipment, look for:*

Rust/corrosion, deformation or damage to anchors

Deformation of buckles, dee-rings, and snaphooks

All of the above

Cuts, frays, holes, or deterioration of webbing or rope

Take Quiz

Emergency Action Plan

[Watch time: 14:56]

Watch the Emergency Action Plan training to learn the requirements when dealing with an emergency in the work environment. Take the quiz below and submit!

VEIC - Emergency Action Plan Quiz

"*" indicates required fields

First Name*

Last Name*

Your Department*

1. We take the fear out of emergency situations by:*

Running very fast to get away

By following our training

2. During an emergency our facility needs:*

People who follow their training

Heroes

3. One method of emergency communication is word of mouth:*

False

True

4. If you discover a fire, your first action should be:*

To use a fire extinguisher

Alert others at risk

5. If a medical emergency occurs close to you one very important action to take is:*

Perform CPR

Avoid all contact with blood and other bodily fluid

6. Two methods of detecting a chemical spill or release are to visually see a chemical out of its’ container and:*

Perform advanced lab tests

Smell an unusual chemical odor

7. If a power failure occurs you should stay away from machines because equipment could restart unexpectedly:*

True

False

8. If you become aware of another employee committing a violent act or threat, you should:*

Cut her/him some slack (they might be having a bad day)

Immediately report the concern to a manager

Post Custom Field

Take Quiz

Lockout/Tagout

[Watch time: 8:08]

Even if you are not directly working with a lockout/tagout program, these protocols are required for all employees to know. Be sure to complete the quiz below!

This is Modal Title

VEIC - Lockout/Tagout Quiz

"*" indicates required fields

Email (optional)

First Name*

Last Name*

Department*

1. Lockout/tagout is a procedure that keeps energy controls in an off or safe position during maintenance and service assignments.*

True

False

2. An employee who is allowed to lock and tag equipment is called an:*

Outstanding employee

Authorized employee

3. Some energy sources are:*

electricity, hydraulic, pneumatic

gear, belt, wire

4. An energy source that causes many accidents because it is not obvious is:*

Stored energy

High energy

5. We have Energy Control Procedures for machines with more than one energy source:*

False

True

6. In our facility we:*

Only use a tag

Always use a lock and tag (except when a control does not accept a lock)

7. All affected employees must be notified when equipment they operate is Locked Out:*

False

True

8. After initial lockout/tagout of a machine the following should be done:*

Talk to your supervisor

Try to operate the machine to verify that all power is off or safe

9. When multiple employees are working on a project each must apply their own lock:*

True

False

10. We must understand the lockout/tagout procedures used by:*

Contractors

The neighboring facility

Take Quiz

Defensive Driving

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

Take Quiz